EPPAN, SOUTH TYROL · 46.48°N 11.28°E · EST. 2002

Retrofit

In many existing buildings, older control panels run reliably until a defect or modernization is necessary. If the original manufacturer no longer offers a replacement, a solution is needed that is technically modern and mechanically fits the existing installation situation.

  • JUNG
  • GIRA
  • BERKER
  • ABB
  • FELLER
  • MERTEN
  • Schneider Electric
DIVUS exchange options for retrofit projects

Retrofitting is more than just a replacement device

If operating devices need to be replaced in a finished building, the mechanical installation situation is crucial. A new solution must not only fit functionally. It must take into account the existing opening, the design of the installation and the requirements for visualization, intercom and operation.

DIVUS offers for numerous older devices JUNG, GIRA, BERKER, ABB, FELLER, MERTEN and Schneider Electric suitable retrofit options. Our devices are compatible with installation and can be used in many projects without any further work on the masonry.

This is a significant advantage, especially for high-quality residential buildings, hotels, office spaces or public buildings: the architecture is retained while operation, display technology, visualization and system integration are brought up to date.

Typical retrofit situations

The specific solution is examined on a project-by-project basis. These cases are particularly common.

Replace GIRA Control

There are DIVUS replacement options for GIRA Control 9 and GIRA Control 19 that can be tested mechanically and functionally.

Check GIRA retrofit

Modernize existing JUNG devices

Older JUNG PCT, SP, SC and MT701 devices can be replaced with suitable DIVUS panels depending on the installation situation.

Check JUNG retrofit

Replacing the MT701 family

Exchange paths are available for testing for MT701-based devices from FELLER, JUNG, GIRA, ABB, MERTEN and Schneider Electric.

Check MT701 retrofit
Retrofit overview with suitable DIVUS devices

Practical

First check, then replace cleanly. Without unnecessary construction work.

In many cases, the manufacturer, model name, photos of the installation situation and the desired new function are sufficient for a quick assessment.

DIVUS then checks whether SUPERIO, TOUCHZONE, KNX IQ, CTP04 or another DIVUS solution makes sense for the exchange.

The PDF overview shows known exchange options and serves as an initial reference point for planners, installers and operators.

Open retrofit page

Directly to the exchange list

Retrofit

DIVUS exchange devices

PDF overview of the known retrofit and replacement options.

Open PDF

Contact

Request a project

Take a photo of the existing device, note the model and send it in directly for inspection.

Email sales

DIVUS GmbH

Pillhof 51 I-39057 Eppan (BZ) - Italy

HK BZ / REA No. BX-169895

VAT No. IT 02309820211

+39 0471 633662

+49 (0) 711 5087 5923

Contact

Certificates

Support

Need help?